Skip to main content
HERITAGE + RESIDENTIAL + COMMERCIAL BCIN STAMPED $5M INSURED 24-HR EMERGENCY
Seamless microcement bathroom with walk-in shower in a Toronto condo

Microcement Toronto, ON | Luxury Seamless Walls + Floors

Concrete

Toronto Elite Masonry provides chimney repair, brick restoration and heritage masonry throughout Toronto, backed by 22+ years combined Toronto masonry and heritage restoration. We apply microcement, a thin cement-polymer finish troweled in layers, to bathrooms, showers, kitchens, floors and feature walls. The result is seamless and grout-free, sealed for wet areas.

Projects typically run $6,000 to $35,000 depending on area, substrate and wet-area detailing.

$6,000 - $35,000 CAD 5-10 days including cure between layers
SeamlessGrout-FreeWet-Area SealedCustom Colours

24-Hour Written Quote

Fixed Price

Site visit in 48 hours. Written quote on letterhead in 24 hours after that. Fixed-price. BCIN stamped where required.

No obligation. Written quote on letterhead before any contract.

  • 22+ Yrs Toronto Heritage Track Record
  • $5M Liability + WSIB
  • 24-Hour Written CAD Quote
  • 10-Year Workmanship Warranty
  • 4-Hour Emergency On-Site
  • BCIN Stamped Structural Work

What Is Included in Our Microcement Work?

Hand-troweled, grout-free microcement finishes for bathrooms, floors and feature walls.

  • Substrate preparation and mesh
  • Multi-layer hand-troweled finish
  • Waterproof sealing for showers and wet rooms
  • Custom colours and textures
Craftsman hand-troweling microcement on a primed wall
Craftsman hand-troweling microcement on a primed wall

What Is Microcement?

Microcement is a thin polymer-modified cement coating applied by hand in several layers, usually 2-3 mm total. It bonds to most rigid substrates and creates a continuous surface with no grout lines. It is popular for bathrooms, showers, kitchens, floors and feature walls in Toronto condos and renovated homes.

Microcement vs Tile

TileMicrocement
JointsGrout linesSeamless
CleaningGrout stainsWipe clean
LookPatternContinuous, soft texture
Over existing tileRemove usuallyOften possible

Seamless microcement floor through an open living space

Doing Wet Areas Right

Waterproofing first

In showers, the finish is only as good as what is under it. We install wet area waterproofing, embed fiberglass mesh in primer and seal the finished surface with polyurethane sealer in multiple coats.

For commercial floors, see polished concrete. For exterior finishes, see stucco.

Microcement is a specialty finish offered by our Toronto masonry team, applied by the same crews that handle our stucco and concrete work.

How Much Does Microcement Cost in Toronto?

Typical range (CAD)

$6,000 - $35,000

Per project

Feature walls start around $6,000. Full bathrooms with showers, floors and wet-area waterproofing reach $35,000.

Get My Written Quote

What Moves the Price

Cost driver How it affects your quote
Area Total square footage of walls and floors.
Substrate Tile can sometimes be covered; damaged substrates need rebuilding.
Wet areas Showers need waterproofing and extra sealing.
Finish Custom colours and textures add steps.

Every quote is written on letterhead within 24 hours of the site visit, fixed-price, with a 5-stage draw schedule. No change orders without your written approval.

Which Codes and Standards Apply to Microcement in Toronto?

Toronto masonry is regulated work. These are the rules we build to on every microcement job, and why they matter to you.

Polymer-Modified Cement

Thin, flexible cement finish designed for walls and floors.

Wet Area Waterproofing

A waterproofing layer under the finish in showers and wet rooms.

Polyurethane Sealer

Protects against water and stains, especially in bathrooms and kitchens.

How Does Our Microcement Process Work?

Timeline: 5-10 days including cure between layers. Each stage lines up with a draw on your fixed-price contract, so you only pay for work that is done.

  1. 1

    Site Visit + Samples

    Within 48 hours

    We check substrates and show colour and texture samples.

  2. 2

    Prep + Waterproof

    Day 1-2

    Primer, fiberglass mesh and wet-area waterproofing.

  3. 3

    Base Layers

    Day 2-5

    Base microcement layers troweled and cured.

  4. 4

    Finish Layers

    Day 5-8

    Fine finish layers troweled by hand to the chosen texture.

  5. 5

    Seal

    Final days

    Polyurethane sealer applied in coats and cured.

Want a Firm Number for Your Microcement Project?

Book a free site visit. No obligation, a written fixed-price quote within 24 hours of the visit and a 10-year workmanship warranty on the work.

Why Choose Toronto Elite Masonry for Microcement?

Wet Areas Done Properly

Waterproofing under the finish, not just sealer on top.

Hand Craft

Troweled by experienced finishers, layer by layer.

Home Protected

Floors, fixtures and adjoining rooms covered throughout.

Written Quote

Fixed price within 24 hours of the visit.

Recent Microcement Work in Toronto

Safe-generic photos from Toronto job sites. Click any image to enlarge.

Before + After

Before: Dated tile with stained grout Before
After: Seamless microcement, no grout After
Dated tile with stained grout to Seamless microcement, no grout

What Customers Say About Our Microcement Work

"We wanted a seamless microcement shower and floor instead of tile. The finish is flawless, sealed properly for the wet zone, and they protected the rest of the condo the whole time."
Nadia F.Yonge-Eglinton$12.8KMicrocement Bathroom
"We manage a 60-unit rental building and the foundation parging was failing on three sides. Toronto Elite scanned every wall for moisture, phased the work so tenants kept access, and billed our insurer directly for the water-damaged section. WSIB and liability certificates were in my inbox before the scaffold arrived."
Property Manager, 60-unit rental buildingMississauga$46KCommercial Parging + Waterproofing
"We run several infill builds a year and masonry is usually where the schedule slips. Toronto Elite's crew showed up on the booked day, had the BCIN stamped lintel details ready before the inspector asked, and finished the brick veneer two days early. They answer the phone, which is rarer than it should be."
Site Superintendent, design-build firmVaughan$64KNew Build Brick Veneer

Microcement Across Toronto + the GTA

We send our own crews and fleet to every neighbourhood below, with a site visit inside 48 hours and a 4-hour emergency response in Toronto.

A Yonge-Eglinton condo owner wanted a seamless microcement shower and floor instead of tile. We waterproofed the wet zone, troweled the finish in layers and sealed it, protecting the rest of the condo the whole time. Total: $12,800.

Microcement FAQs

How much does microcement cost in Toronto?

Microcement projects in Toronto typically run $6,000 to $35,000, depending on area, substrate and wet-area detailing.

Is microcement waterproof?

Microcement itself is not fully waterproof. In showers we install a waterproofing layer underneath and seal the finish with polyurethane.

Can microcement go over tile?

Often yes, if the tile is well bonded and grout lines are filled and meshed first.

How durable is it?

Very durable on walls and floors when sealed and maintained. Floors may need resealing over time.

Is it slippery?

Anti-slip additives can be added for shower floors.

How long does it take?

Usually 5 to 10 days, including cure time between layers.

Can I choose any colour?

Yes, within the system's palette, plus custom tints.

What warranty do you give?

A written 10-year workmanship warranty.

24-hour emergency chimney + foundation response

Ready to Book Microcement in Toronto?

We walk your property within 48 hours of your call and put a CAD quote on letterhead in your hands 24 hours after that. No verbal estimates, no change orders without your written approval.

  • BCIN stamped where required
  • $5M liability + WSIB
  • 10-year workmanship warranty
Call (647) 277-2003Request Site Visit