What Masonry Restoration Covers
Masonry restoration brings a whole facade back to sound, watertight and good-looking condition. It is different from a single repair. On a Victorian or Edwardian Toronto home, a facade restoration usually includes a survey, structural repairs to arches and lintels, replacement of damaged brick, full repointing and gentle cleaning.
Our Restoration Stages
| Stage | Work | Draw |
|---|---|---|
| Survey + scaffold | Photo log, infrared moisture scan, permits, scaffold | 1 |
| Structural | Lintels, jack arches, sills, BCIN review | 2 |
| Brick | Reclaimed brick, Dutchman repairs | 3 |
| Pointing | Rake and repoint in matched mortar, tuckpoint if needed | 4 |
| Finish | Clean, scaffold down, sign-off, warranty | 5 |

Why We Start With an Infrared Moisture Scan
Water is behind almost every facade problem. Infrared moisture detection shows where water is in the wall before we open anything up: around failed flashing, under sills, behind downspouts. That changes the scope and stops you paying to fix symptoms.
Arches, Lintels and Sills
Victorian and Edwardian facades rely on brick arches and stone sills. Jack arches drop when joints wash out, brick lintels crack, and stone sills tip back and let water run into the wall. We rebuild arches with matched brick, reset sills with a proper slope and replace failed steel lintels with corrosion-protected steel where required.
No sandblasting, ever
Sandblasting strips the hard fired face off old brick, which then soaks up water and spalls. We clean heritage brick with low pressure and gentle cleaners only.
Heritage Facades
On designated and Heritage Conservation District properties, restoration is reviewed by Toronto Heritage Preservation. We prepare the submission with mortar analysis and samples. See heritage masonry for district rules and tuckpointing for joint finishes.
Facade restoration brings together every trade at our Toronto masonry company, from brick replacement to lime-mortar repointing.